Akira Seiki Performa V5 Parameters.


Results 1 to 2 of 2

Thread: Akira Seiki Performa V5 Parameters.

  1. #1
    jeff7734's Avatar
    Join Date
    Dec 2018
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Akira Seiki Performa V5 Parameters.

    We have the above machine with a Mitsubishi M50 control.
    Been setting on our shop floor idle for years and the battery went dead.
    New battery coming but the parameters are garbled.
    Does anyone have a set of parameters for this machine?
    Akira Seiki wants an arm and leg for a duplicate set.
    Even if they were just a printed set I could plug them in old school.



  2. #2
    jeff7734's Avatar
    Join Date
    Dec 2018
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default

    The actual parameters are available from Akira Seiki, but are far from cheap
    Service Department

    Akira-Seiki, USA

    PH 925-443-1200



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Akira Seiki Performa V5 Parameters.

Akira Seiki Performa V5 Parameters.