Build Thread Eding CNC720 and UIO-10 in Emco F3 conversion

Results 1 to 2 of 2

Thread: Eding CNC720 and UIO-10 in Emco F3 conversion

  1. #1
    Member
    Join Date
    Mar 2012
    Location
    New Zealand
    Posts
    143
    Downloads
    0
    Uploads
    0

    Default Eding CNC720 and UIO-10 in Emco F3 conversion

    I'm doing a conversion of an Emco F3 mill to CNC and have chosen the Eding CNC720 with an UIO-10 expansion board as the controller. You can follow progress over on the Emco Mills sub forum.

    Similar Threads:
    Having fun with my Emco F3 and Super 11 CD


  2. #2
    Member
    Join Date
    Mar 2012
    Location
    New Zealand
    Posts
    143
    Downloads
    0
    Uploads
    0

    Default Re: Eding CNC720 and UIO-10 in Emco F3 conversion

    I'm trying to figure out how to wire the driver alarm output from the 3 (x y z) drivers into the DRVALM input.https://www.cnczone.com/forums/stepp...ml#post2491938

    Any help would be appreciated. Thanks

    Having fun with my Emco F3 and Super 11 CD


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Eding CNC720 and UIO-10 in Emco F3 conversion

Eding CNC720 and UIO-10 in Emco F3 conversion