Problem HELP BZT 750P

Results 1 to 2 of 2

Thread: HELP BZT 750P

  1. #1
    Member Francois20's Avatar
    Join Date
    Sep 2020
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default HELP BZT 750P

    HELLO,
    I am new excuse me I made with a translator because I speak only French..
    My problem is that I can not reference my machine the numbers run in eding cnc and never stop.
    My machine is well installed there are recognized drivers and the software is not in demo mode I am on the correct port in the configuration for usn
    Thank you for your help
    Francois



  2. #2
    Member Geko69's Avatar
    Join Date
    Nov 2008
    Posts
    41
    Downloads
    3
    Uploads
    0

    Default Re: HELP BZT 750P

    Quote Originally Posted by Francois20 View Post
    HELLO,
    I am new excuse me I made with a translator because I speak only French..
    My problem is that I can not reference my machine the numbers run in eding cnc and never stop.
    My machine is well installed there are recognized drivers and the software is not in demo mode I am on the correct port in the configuration for usn
    Thank you for your help
    Francois
    Hello,
    are your reference switches installed right?
    Do you get response on the I/O Page in EdingCNC while you are jogging your machine to your reference point?

    Is your machine moving during the referencing or do you just see the Coordinates Are changing?

    Kind regards
    Geko



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

HELP BZT 750P

HELP BZT 750P

HELP BZT 750P