HELP BZT 750P

[Francois20]

HELLO,
I am new excuse me I made with a translator because I speak only French..
My problem is that I can not reference my machine the numbers run in eding cnc and never stop.
My machine is well installed there are recognized drivers and the software is not in demo mode I am on the correct port in the configuration for usn
Thank you for your help
Francois

[Geko69]

HELLO,
I am new excuse me I made with a translator because I speak only French..
My problem is that I can not reference my machine the numbers run in eding cnc and never stop.
My machine is well installed there are recognized drivers and the software is not in demo mode I am on the correct port in the configuration for usn
Thank you for your help
Francois

Hello,
are your reference switches installed right?
Do you get response on the I/O Page in EdingCNC while you are jogging your machine to your reference point?

Is your machine moving during the referencing or do you just see the Coordinates Are changing?

Kind regards
Geko