Eding pendant alternative

Results 1 to 4 of 4

Thread: Eding pendant alternative

  1. #1
    Member
    Join Date
    Aug 2019
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Eding pendant alternative

    Hi,

    I have a eding CPU5B and was looking for a pendant. On sorotec I've seen a few different ones.
    A cheap diy https://www.sorotec.de/shop/Handradb...-EdingCNC.html
    And a genuine Eding for 297,- https://www.sorotec.de/shop/Wireless...l--Lizenz.html

    After seeing the picture of the genuine I was pretty sure I've seen it before.

    It took me a while, and then I was scrolling through aliexpress and there I suddenly saw a pendant that was exactly the same. Well after checking both pictures I noticed the FN button has a different color.

    € 81,48 | XHC CNC handwheel wireless Mach3 MPG pendant handwheel for milling machine 4 6 axis MPG WHB04B-4 WHB04B-6
    https://s.click.aliexpress.com/e/srvlCZPK

    Does anyone know if that would work with a Eding CPU5B?

    Thanks,

    Similar Threads:


  2. #2

    Join Date
    Nov 2019
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default

    Hi,
    Unfortunately I've no answer for your question.
    But have you been able to find an answer ?
    Thanks for sharing



  3. #3
    Member
    Join Date
    Jul 2009
    Location
    Netherlands
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Re: Eding pendant alternative

    Hi Dutchy_79,

    I wrote Eding-CNC with a similar question about 6 months ago.
    Their answer was that:
    1) I can use the pendant they offer on their website on my old CPU2 controller, so I'm assuming it should also work fine with your modern CPU5B.
    2) They told me that there are a lot of pendants on the market that look the same, but are not supported.

    Now I'm not sure what the difference would be, as the pendant they offer on their website and the ones from AliXpress are, to my eyes, identical up to the fonts used.



  4. #4
    Member mactec54's Avatar
    Join Date
    Jan 2005
    Location
    USA
    Posts
    15362
    Downloads
    0
    Uploads
    0

    Default Re: Eding pendant alternative

    Quote Originally Posted by Dutchy_79 View Post
    Hi,

    I have a eding CPU5B and was looking for a pendant. On sorotec I've seen a few different ones.
    A cheap diy https://www.sorotec.de/shop/Handradb...-EdingCNC.html
    And a genuine Eding for 297,- https://www.sorotec.de/shop/Wireless...l--Lizenz.html

    After seeing the picture of the genuine I was pretty sure I've seen it before.

    It took me a while, and then I was scrolling through aliexpress and there I suddenly saw a pendant that was exactly the same. Well after checking both pictures I noticed the FN button has a different color.

    € 81,48 | XHC CNC handwheel wireless Mach3 MPG pendant handwheel for milling machine 4 6 axis MPG WHB04B-4 WHB04B-6
    https://s.click.aliexpress.com/e/srvlCZPK

    Does anyone know if that would work with a Eding CPU5B?

    Thanks,
    They may well be the same but one is for Mach3 not Eding it would have to be programed to suit each different control, if it was just using a cable to connect then almost any would be able to be wired to suit each control

    They also have a different wireless receiver

    Mactec54


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Eding pendant alternative

Eding pendant alternative