- Need Help!- CPU5A4E Edingcnc with solenoid
-
Registered
CPU5A4E Edingcnc with solenoid
I'm building a fabric plotter/cutter and will be using a a relay with pneumatic valve to control my z axis.
Is it possible to use the z axis direction pin to control the relay? I could use an aux port but want to have the tangential knife to lift a blade in tight corners (tanknife z-up angle above a certain degree).
Thank You
Similar Threads:
-
- Need Help!- CPU5A4E Edingcnc with solenoid
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules