Edgecam posts to Share


Results 1 to 11 of 11

Thread: Edgecam posts to Share

  1. #1
    Registered
    Join Date
    Sep 2009
    Location
    Canada
    Posts
    19
    Downloads
    0
    Uploads
    0

    Default Edgecam posts to Share

    Here are some posts that I am using with edgecam that I thought I would share with anyone who is interested, If you have any posts that you would like to share post them here.
    If you have any questions About my posts let me know and I will do what I can to help.

    This post is for a Haas super minimill
    There is a G07 command with each tool change,on my machine i have made a program to move the table to a safe position every time there is a tool change Because there is limited space with this machine while using the rotary And is used evry time there is a G07 command
    Here is the program

    M05
    M09
    G40
    G00 G53 Z4.4
    G53Y0
    G53X-16.
    M99

    A very simple program but I needed to put it in with every tool change and it was easier to asign it to its own G code and just type G07 instead.

    If you want to remove th G07 command go to the code generator, Code constructors, Tool change, And remve it from First tool change,General tool change, and last tool change

    Similar Threads:
    Attached Files Attached Files


  2. #2
    Registered
    Join Date
    Sep 2009
    Location
    Canada
    Posts
    19
    Downloads
    0
    Uploads
    0

    Default

    Here is a post for a Haas VF 3 with a rotary head

    Attached Files Attached Files


  3. #3
    Registered
    Join Date
    Sep 2009
    Location
    Canada
    Posts
    19
    Downloads
    0
    Uploads
    0

    Default

    Here is a Haas VF 4

    Attached Files Attached Files


  4. #4
    Registered
    Join Date
    Sep 2009
    Location
    Canada
    Posts
    19
    Downloads
    0
    Uploads
    0

    Default

    Here is an untested post for a Haas lathe with poor graphics

    Attached Files Attached Files


  5. #5
    Registered
    Join Date
    Feb 2010
    Location
    USA
    Posts
    371
    Downloads
    0
    Uploads
    0

    Default

    Thanks for sharing. What's the trick to getting the machine modifications to stick? I tried to change a post by changing the machine shape, saved it and compiled it, but even when I reopen the file, the machine is back to the original.
    Thanks
    Eric



  6. #6
    Member
    Join Date
    Jan 2009
    Location
    Canada
    Posts
    52
    Downloads
    0
    Uploads
    0

    Default

    What do you mean when you say machine modifications



  7. #7
    Registered
    Join Date
    Feb 2010
    Location
    USA
    Posts
    371
    Downloads
    0
    Uploads
    0

    Default

    I change the shape of the machine in code wizard, saved it and compiled it, but when I select that post in EdgeCAM, it's back to the one it started with. Opening it in code wizard again shows the unmodified machine.



  8. #8
    Registered
    Join Date
    Jan 2011
    Location
    Sweden
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default

    Hi

    Anyone that has a graphic file for a Haas SMM 3 axis for edgecam post processor.

    I would highly appreciate it.

    /mille



  9. #9
    Registered
    Join Date
    Sep 2012
    Location
    USA
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default NEED POST PROCESSOR FOR HARDINGE CONQUEST T42

    If anyone has an EdgeCam postprocessor for Hardinge Conquest T42 w/ Live Tool & Sub-Spindle please contact me. I am in Phx AZ.



  10. #10
    Member yuu's Avatar
    Join Date
    Sep 2008
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: Edgecam posts to Share

    hello i need a postprocessor for Edgecam v12.5 HASS LATHE TL 2 or similar



  11. #11
    Member jacek1374's Avatar
    Join Date
    Jan 2019
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: Edgecam posts to Share

    Im chasing a post for a Okuma MU400 using with edgecam if anyone has one handy 5 axis



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Edgecam posts to Share

Edgecam posts to Share