Waveform in open pocket


Results 1 to 5 of 5

Thread: Waveform in open pocket

  1. #1
    Member JacobD's Avatar
    Join Date
    Jun 2019
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default Waveform in open pocket

    Hello all,

    Is it not possible to create a waveform toolpath in a open pocket?? I want the toolpath to look like this I can create en InventorHSM
    https://www.screencast.com/t/vY9vNvYyl

    This is what I have could done in EdgeCAM
    https://www.screencast.com/t/XxjKnDxXxrx

    Hopefully someone could help:-)

    Thanks,
    Jacob

    Similar Threads:


  2. #2
    Member Vegabond's Avatar
    Join Date
    Dec 2008
    Location
    Norway
    Posts
    441
    Downloads
    0
    Uploads
    0

    Default Re: Waveform in open pocket

    Hi!

    This can be done in Edgecam too!
    Has you chosen the faces, or do you made a open mill feature?

    I think there is a boundary problem. Don`t use that. And make a feature.

    EDIT: see my attached picture Waveform in open pocket-open-mill-jpg

    Last edited by Vegabond; 06-09-2019 at 04:08 PM. Reason: Picture
    My second homebuilt cnc machine cnczone.com/forums/norwegian_club_house/123977-ombygget_cnc_-_gecko_540_a.html


  3. #3
    Member JacobD's Avatar
    Join Date
    Jun 2019
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default Re: Waveform in open pocket

    Hi,

    I can't figure out what wrong, can you create a short video to show me how I can do this?

    Thanks,



  4. #4
    Member JacobD's Avatar
    Join Date
    Jun 2019
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default Re: Waveform in open pocket

    Hello,

    I have figure out now, thanks for the help:-)



  5. #5
    Member Vegabond's Avatar
    Join Date
    Dec 2008
    Location
    Norway
    Posts
    441
    Downloads
    0
    Uploads
    0

    Default Re: Waveform in open pocket

    Fine! It should be easy, and with the standard settings.
    What causes the problem?

    -Robert.

    My second homebuilt cnc machine cnczone.com/forums/norwegian_club_house/123977-ombygget_cnc_-_gecko_540_a.html


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Waveform in open pocket

Waveform in open pocket