EDGECAM ROUGH MILL STARTING WITH AN HELIX MESSAGE


Results 1 to 5 of 5

Thread: EDGECAM ROUGH MILL STARTING WITH AN HELIX MESSAGE

  1. #1
    Member
    Join Date
    Sep 2010
    Location
    South Africa
    Posts
    80
    Downloads
    0
    Uploads
    0

    Default EDGECAM ROUGH MILL STARTING WITH AN HELIX MESSAGE

    Hi! Im machining a contour with a small diameter tool using a ROUGH MILL with WAVEFORM strategy. The toolpath is starting on the piece with an helix motion. The setting gives us two option: pre drilled hole and helix. How can i make the toolpath ROUGH MILL WITH WAVEFORM strategy to start from outside to inside ? Thanks in advance !

    Similar Threads:


  2. #2
    Member Vegabond's Avatar
    Join Date
    Dec 2008
    Location
    Norway
    Posts
    431
    Downloads
    0
    Uploads
    0

    Default Re: EDGECAM ROUGH MILL STARTING WITH AN HELIX MESSAGE

    Hi!

    I think your option "stock type" isn`t choosed, if you choose "Current Stock" it should be starting outside of the part. IF you have inserted a stock

    See my attached picture.


    EDGECAM  ROUGH MILL STARTING WITH  AN HELIX MESSAGE-edgecam2020-jpg
    Greetings from Robert

    My second homebuilt cnc machine cnczone.com/forums/norwegian_club_house/123977-ombygget_cnc_-_gecko_540_a.html


  3. #3
    Member
    Join Date
    Sep 2010
    Location
    South Africa
    Posts
    80
    Downloads
    0
    Uploads
    0

    Default Re: EDGECAM ROUGH MILL STARTING WITH AN HELIX MESSAGE

    Quote Originally Posted by Vegabond View Post
    Hi!

    I think your option "stock type" isn`t choosed, if you choose "Current Stock" it should be starting outside of the part. IF you have inserted a stock

    See my attached picture.


    EDGECAM  ROUGH MILL STARTING WITH  AN HELIX MESSAGE-edgecam2020-jpg
    Greetings from Robert

    Hi Robert and thank you very much for your reply. I have tried as you suggested but i still can not get the toolpaths to start from outside to inside . Surely there is something that im missing. Here are attached some files for your consideration.EDGECAM  ROUGH MILL STARTING WITH  AN HELIX MESSAGE-helix-approach-png



  4. #4
    Member
    Join Date
    Sep 2010
    Location
    South Africa
    Posts
    80
    Downloads
    0
    Uploads
    0

    Default Re: EDGECAM ROUGH MILL STARTING WITH AN HELIX MESSAGE

    EDGECAM  ROUGH MILL STARTING WITH  AN HELIX MESSAGE-edgecam-stock-type-png



  5. #5
    Member
    Join Date
    Sep 2010
    Location
    South Africa
    Posts
    80
    Downloads
    0
    Uploads
    0

    Default Re: EDGECAM ROUGH MILL STARTING WITH AN HELIX MESSAGE

    Quote Originally Posted by mousongie View Post
    Hi Robert and thank you very much for your reply. I have tried as you suggested but i still can not get the toolpaths to start from outside to inside . Surely there is something that im missing. Here are attached some files for your consideration.EDGECAM  ROUGH MILL STARTING WITH  AN HELIX MESSAGE-helix-approach-png
    EDGECAM  ROUGH MILL STARTING WITH  AN HELIX MESSAGE-edgecam-stock-insert-png



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

EDGECAM  ROUGH MILL STARTING WITH  AN HELIX MESSAGE

EDGECAM  ROUGH MILL STARTING WITH  AN HELIX MESSAGE