Cannot produce radius


Results 1 to 2 of 2

Thread: Cannot produce radius

  1. #1
    Registered
    Join Date
    Feb 2018
    Location
    United Kingdom
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Cannot produce radius

    Hello,
    I have a kidney shaped pocket 40mm wide and 40mm deep in the part Im machining. The pocket has a 10mm radius around the top edge. i have produced the slot to size but i cannot get the Edgecam to produce a radius around it. I cant seem to get the "Find Features" tab to recognise the radius separately from the pocket.
    Im currently using a 16mm endmill to produce the pocket if this helps.

    Any help much appreciated.

    Similar Threads:


  2. #2
    Registered Vegabond's Avatar
    Join Date
    Dec 2008
    Location
    Norway
    Posts
    406
    Downloads
    0
    Uploads
    0

    Default Re: Cannot produce radius

    Hello!

    Maby i don`t understand our problem, but if you have the latest software (2018R1) you can pick the solid face in a profiling cycle i think. Try that
    And if you use Cusp Hight, you can get the radius fine

    Post a pic if you can!

    -Robert

    My second homebuilt cnc machine cnczone.com/forums/norwegian_club_house/123977-ombygget_cnc_-_gecko_540_a.html


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Cannot produce radius

Cannot produce radius