You will need to modify your post, talk to your reseller.
Hello,
I have just started using Edgecam 2017 R2.
Every time i create a new program it will not post an M00 or M01, i have selected these options in the drop down tab and on tool selection in the work plan.
I would also like to add a M102 "load position" in to my programs but i dont know how?
Im currently posting to a Ycm with a fanuc18i control.
Any help would be greatly appreciated!
Many thanks
Similar Threads:
You will need to modify your post, talk to your reseller.
never talk to the reseller,,,we can help here,,,resellers are salesmen only,,,,,,send me the post and what you need done,,and i can adjust it,,,,
Resellers should do the programming of the post and not only sell it!
Remember, if you buy a post for many $1000, do not post it in a forum! then everyone get it for free....
My second homebuilt cnc machine cnczone.com/forums/norwegian_club_house/123977-ombygget_cnc_-_gecko_540_a.html
when i got into this industry,,,2002,,,,im 37 now,,,getting intouch with a reseller took almost 2 weeks,,,,the experience ive,,they dont really care if we are down,,after buying a cam package for 15k with support and a post,,,its why i started writing posts...just my opinion
Keysoftwareservice.com
Ok, then i am lucky! i can call my support and they will answer the phone and help me after 20 sec (almost every time) If not i can send a email through the support system and they will contact me after some hours. It depend on how fast i need help
But if you pay for the support, and get a answer after two weeks!? you should write a email to Vero Software, the people that make Edgecam and tell them how your support is.
Edgecam | Contact Us
- - - Updated - - -
Ok, then i am lucky! i can call my support and they will answer the phone and help me after 20 sec (almost every time) If not i can send a email through the support system and they will contact me after some hours. It depend on how fast i need help
But if you pay for the support, and get a answer after two weeks!? you should write a email to Vero Software, the people that make Edgecam and tell them how your support is.
http://www.edgecam.com/contact
My second homebuilt cnc machine cnczone.com/forums/norwegian_club_house/123977-ombygget_cnc_-_gecko_540_a.html
i thank god, support with the big companies are bad,,,,if there was good support , i would out of business
Keysoftwareservice.com