POST ISSUE EDGECAM 2011 fanuc milling post


Page 1 of 2 12 LastLast
Results 1 to 20 of 25

Thread: POST ISSUE EDGECAM 2011 fanuc milling post

  1. #1
    Registered
    Join Date
    Nov 2005
    Location
    USA
    Posts
    41
    Downloads
    0
    Uploads
    0

    Default POST ISSUE EDGECAM 2011 fanuc milling post

    need to modify post so % character is at very top of program.
    right now the problem is turret and tool description are posting above % character.
    help please

    Eric

    Similar Threads:


  2. #2
    Member Vegabond's Avatar
    Join Date
    Dec 2008
    Location
    Norway
    Posts
    441
    Downloads
    0
    Uploads
    0

    Default Re: POST ISSUE EDGECAM 2011 fanuc milling post

    Hi!

    Do you have the CGD files for the postprocessor?
    Im not an expert here, but it should be easy.

    -Robert

    My second homebuilt cnc machine cnczone.com/forums/norwegian_club_house/123977-ombygget_cnc_-_gecko_540_a.html


  3. #3
    Registered
    Join Date
    Nov 2005
    Location
    USA
    Posts
    41
    Downloads
    0
    Uploads
    0

    Default Re: POST ISSUE EDGECAM 2011 fanuc milling post

    was attached

    Last edited by MACHINE GOAT; 01-30-2019 at 02:53 PM. Reason: removed file


  4. #4
    Member Vegabond's Avatar
    Join Date
    Dec 2008
    Location
    Norway
    Posts
    441
    Downloads
    0
    Uploads
    0

    Default Re: POST ISSUE EDGECAM 2011 fanuc milling post

    Ok, thanks, is this a file\postprocessor you have payd much money for? then you should not upload it, i was asking only about that you have the file, so you can change it
    I don`t have time right now, but i will take a look at it in a few hours

    My second homebuilt cnc machine cnczone.com/forums/norwegian_club_house/123977-ombygget_cnc_-_gecko_540_a.html


  5. #5
    Registered
    Join Date
    Nov 2005
    Location
    USA
    Posts
    41
    Downloads
    0
    Uploads
    0

    Default Re: POST ISSUE EDGECAM 2011 fanuc milling post

    Thanks, I am not an edgecam user just trying to help fellow programmer out with this.
    He does no have much experience with post edits.
    So any help is greatly appreciated.
    Should I remove the previously attached file?



  6. #6
    Member Vegabond's Avatar
    Join Date
    Dec 2008
    Location
    Norway
    Posts
    441
    Downloads
    0
    Uploads
    0

    Default Re: POST ISSUE EDGECAM 2011 fanuc milling post

    So you only need a % symbol at the start, and NOT on the end? or do you need in both places?

    Thanks

    My second homebuilt cnc machine cnczone.com/forums/norwegian_club_house/123977-ombygget_cnc_-_gecko_540_a.html


  7. #7
    Registered
    Join Date
    Nov 2005
    Location
    USA
    Posts
    41
    Downloads
    0
    Uploads
    0

    Default Re: POST ISSUE EDGECAM 2011 fanuc milling post

    both



  8. #8
    Member Vegabond's Avatar
    Join Date
    Dec 2008
    Location
    Norway
    Posts
    441
    Downloads
    0
    Uploads
    0

    Default Re: POST ISSUE EDGECAM 2011 fanuc milling post

    If the guy pay for example $2000 so... YES!

    If he get it for free, i think you can leave it here

    Do you wan`t it back with the adjustment? or do yoiu want to try to fix it if i told you what you should do?

    My second homebuilt cnc machine cnczone.com/forums/norwegian_club_house/123977-ombygget_cnc_-_gecko_540_a.html


  9. #9
    Member Vegabond's Avatar
    Join Date
    Dec 2008
    Location
    Norway
    Posts
    441
    Downloads
    0
    Uploads
    0

    Default Re: POST ISSUE EDGECAM 2011 fanuc milling post

    Send me an PM with your email adress, and i send it back with the % symbol in start and end

    My second homebuilt cnc machine cnczone.com/forums/norwegian_club_house/123977-ombygget_cnc_-_gecko_540_a.html


  10. #10
    Registered
    Join Date
    Nov 2005
    Location
    USA
    Posts
    41
    Downloads
    0
    Uploads
    0

    Default Re: POST ISSUE EDGECAM 2011 fanuc milling post

    whatever you think would be least effort for you - remember is old version



  11. #11
    Member Vegabond's Avatar
    Join Date
    Dec 2008
    Location
    Norway
    Posts
    441
    Downloads
    0
    Uploads
    0

    Default Re: POST ISSUE EDGECAM 2011 fanuc milling post

    Im done with it. So just send me you email adress

    My second homebuilt cnc machine cnczone.com/forums/norwegian_club_house/123977-ombygget_cnc_-_gecko_540_a.html


  12. #12
    Registered
    Join Date
    Nov 2005
    Location
    USA
    Posts
    41
    Downloads
    0
    Uploads
    0

    Default Re: POST ISSUE EDGECAM 2011 fanuc milling post

    sent pm



  13. #13
    Member Vegabond's Avatar
    Join Date
    Dec 2008
    Location
    Norway
    Posts
    441
    Downloads
    0
    Uploads
    0

    Default Re: POST ISSUE EDGECAM 2011 fanuc milling post

    PP sendt

    My second homebuilt cnc machine cnczone.com/forums/norwegian_club_house/123977-ombygget_cnc_-_gecko_540_a.html


  14. #14
    Registered
    Join Date
    Nov 2005
    Location
    USA
    Posts
    41
    Downloads
    0
    Uploads
    0

    Default Re: POST ISSUE EDGECAM 2011 fanuc milling post

    ok now problem we have is % character in front of each turret and tool description in the header, (is multi tool program). We need only one occurrence at very top and one at very end of program.



  15. #15
    Member Vegabond's Avatar
    Join Date
    Dec 2008
    Location
    Norway
    Posts
    441
    Downloads
    0
    Uploads
    0

    Default Re: POST ISSUE EDGECAM 2011 fanuc milling post

    Ok, give me some minutes

    My second homebuilt cnc machine cnczone.com/forums/norwegian_club_house/123977-ombygget_cnc_-_gecko_540_a.html


  16. #16
    Member Vegabond's Avatar
    Join Date
    Dec 2008
    Location
    Norway
    Posts
    441
    Downloads
    0
    Uploads
    0

    Default Re: POST ISSUE EDGECAM 2011 fanuc milling post

    Hmm... I can`t place it before the tool information, only after the tool list..
    But give me some minutes/days i will figure it out

    My second homebuilt cnc machine cnczone.com/forums/norwegian_club_house/123977-ombygget_cnc_-_gecko_540_a.html


  17. #17
    Member Vegabond's Avatar
    Join Date
    Dec 2008
    Location
    Norway
    Posts
    441
    Downloads
    0
    Uploads
    0

    Default Re: POST ISSUE EDGECAM 2011 fanuc milling post

    New PP sent!

    My second homebuilt cnc machine cnczone.com/forums/norwegian_club_house/123977-ombygget_cnc_-_gecko_540_a.html


  18. #18
    Registered
    Join Date
    Nov 2005
    Location
    USA
    Posts
    41
    Downloads
    0
    Uploads
    0

    Default Re: POST ISSUE EDGECAM 2011 fanuc milling post

    now programs are missing % character at top



  19. #19
    Member Vegabond's Avatar
    Join Date
    Dec 2008
    Location
    Norway
    Posts
    441
    Downloads
    0
    Uploads
    0

    Default Re: POST ISSUE EDGECAM 2011 fanuc milling post

    Hmmm.. Wierd, that work for me..

    -Check it-

    My second homebuilt cnc machine cnczone.com/forums/norwegian_club_house/123977-ombygget_cnc_-_gecko_540_a.html


  20. #20
    Member Vegabond's Avatar
    Join Date
    Dec 2008
    Location
    Norway
    Posts
    441
    Downloads
    0
    Uploads
    0

    Default Re: POST ISSUE EDGECAM 2011 fanuc milling post

    Here is the .nc code i get out.


    Please check that you are using the latest PP


    %
    (* Turret Position : 1 Tool Description : 25.0 mm Multi-Flute End Mill)
    (* Turret Position : 2 Tool Description : 8.0 mm Multi-Flute End Mill-LS)

    (*************************************)
    ( Innovative Engineered Solutions Inc.)
    (*************************************)
    (* Machine Tool : Chevalier Mill)
    (* Part Name : Parasolfot Chavalier test)
    (* Sequence : Operation 1)
    (* Programmed By : )
    (* Date : 01/30/19)
    (* Time : 22:31:49)
    (* Total Machining Time : 6.407 Minutes)

    O0001 (Parasolfot Chavalier test)
    G17 G40 G80 G90 G94
    G00 Z3.0
    X0.0 Y0.0
    T01 M06 (25.0 MM DIA MULTI-FLUTE END MILL)
    M3 S9999
    G00 G55 X0.0 Y0.0
    G43 Z3.0 H01
    G00 X0.0 Y0.0
    Z1.9685
    M8
    X0.1969 Y-1.8102
    Z0.1969
    Z0.1181
    G01 Z-1.2598 F7.87
    Y-1.7315
    G17 G03 X0.0 Y-1.5347 R0.1969
    G02 I0.0 J1.5347
    G03 X-0.1968 Y-1.7315 R0.1969
    G01 Y-1.8102
    G00 Z0.1969
    Z1.9685
    X0.0 Y0.0
    Z3.0
    X0.0 Y0.0
    M9
    M05
    T02 M06 (8.0 MM DIA MULTI-FLUTE END MILL - LS)
    M3 S9999
    G00 G55 X0.0 Y0.0
    G43 Z3.0 H02
    G00 X0.0 Y0.0
    Z1.9685
    M8
    X0.1969 Y-1.4756
    Z0.1969
    Z0.1181
    G01 Z-1.2598 F7.87
    Y-1.3969
    G03 X0.0 Y-1.2 R0.1969
    G02 I0.0 J1.2
    G03 X-0.1969 Y-1.3969 R0.1969
    G01 Y-1.4756
    G00 Z0.1969
    Z1.9685
    X0.0 Y0.0
    Z3.0
    X0.0 Y0.0
    M9
    M5
    G00 Z3.0
    X0.0 Y0.0
    M30
    %

    My second homebuilt cnc machine cnczone.com/forums/norwegian_club_house/123977-ombygget_cnc_-_gecko_540_a.html


Page 1 of 2 12 LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

POST ISSUE EDGECAM 2011 fanuc milling post

POST ISSUE EDGECAM 2011 fanuc milling post