Teknic SST-1500 Servo Drives Trajectory Planners and Network Controller


Results 1 to 1 of 1

Thread: Teknic SST-1500 Servo Drives Trajectory Planners and Network Controller

  1. #1
    Registered
    Join Date
    Oct 2017
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Teknic SST-1500 Servo Drives Trajectory Planners and Network Controller

    A servo drive system I got with a lot of stuff I purchased from used medical lab equipment. They appear to be in good condition, but using them is over my head. Hopefully someone can get some use from them.

    Make me an offer if you are interested in them!!

    Teknic 2 SST-1500-ACX Servo Drives + 2 TG-540 Trajectory* + NC-540 ControlPoint | eBay

    2 Teknic SST-1500-ACX Drives

    2 TG-540 Trajectory Generators

    1 NC-540 Network Controller


    1 Dynamic Devices GenMate Internal IO Board #EE-6MINTIO-001

    Various Cables to connect the drives/trajectory generators/and network controller.

    Applicable software and manual are still available on the Teknic website.

    Similar Threads:
    Last edited by jjredo; 09-16-2018 at 12:17 PM. Reason: formatting


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Teknic SST-1500 Servo Drives Trajectory Planners and Network Controller

Teknic SST-1500 Servo Drives Trajectory Planners and Network Controller