Going a different direction with my CNC router build, so I no longer need the Super PID and DW618. See my eBay listing HERE and feel free to make an offer. Thanks!

Essentially everything you need to upgrade your CNC router with a powerful 2.25 HP speed controlled router (5000 RPM to 24000 RPM) with a few extras to use on your build.

  • Brand New Super PID w/ white LED display and all original parts/packaging (test mounted and powered via 5V, but never ran router)
  • Heat sink premounted to Super PID
  • DeWalt DW618 with 1/4" and 1/2" collets and wrench (stock speed adjuster has been removed, but can but reinstalled)
  • Elaire 1/8" precision collet
  • IDEC E-stop buttons (x2)
  • IDEC momentary buttons with CNC themed inserts (x3) (green for cycle start, red for feed hold and white for reset)
  • IDEC modular switches (x2) (NO and NC screw terminals)
  • IDEC push botton (x1) (NO and NC screw terminals)
  • Unknown brand MPG with screw terminals
  • Switch labels (x3) (POWER ON, FEED HOLD and CYCLE START)
  • Each item is new or like. Everything is in great condition. The DW618 has not yet been modified, so it can currently be returned to stock if you so desire. I do not have a mount for the router.



If you have any questions or need any other switches/buttons, just let me know.

Thanks!

Similar Threads: