Risk free laser tube/buying with CO2 Laser Power Meter Probe 0-200 watts.

Results 1 to 1 of 1

Thread: Risk free laser tube/buying with CO2 Laser Power Meter Probe 0-200 watts.

  1. #1
    Member
    Join Date
    Dec 2006
    Location
    USA
    Posts
    124
    Downloads
    0
    Uploads
    0

    Default Risk free laser tube/buying with CO2 Laser Power Meter Probe 0-200 watts.

    The Mahoney brand CO2/YAG Laser Power Meter Probe 200 watts for Laser Engraving Cutting Machines (10.6 to 1.06 microns).
    The power meter probe can easily pay for itself with just one or several uses.


    Examples include:

    (1) Receive in-warranty replacement of bad glass CO2 laser tubes from Chinese laser machines manufacturer

    (2) Note laser tube degradation over time to adjust laser machine power settings to ensure laserable materials are not ruined.
    The probe measures laser power for YAG (900-1250 nm) and CO2 (8-11 microns). Works for laser technologies including CO2 lasers, fiber lasers, YAG lamp lasers, diode end-pumped lasers, and diode-side-pumped lasers.

    Each probe is fully tested, calibrated, and each probe has an engraved serial number.

    Comes with instructions and convenient storage container.

    The Mahoney laser power meter probe is utilized to locate bad optics. Maximum CO2 Laser output power is measured before and after each mirror. In this video, the final mirror is measured and found to be bad. The mirror absorbs roughly 9 percent of the laser energy. In general, mirrors are expected to absorb less than 3%.

    Compatibility:
    - This product is great for owners of laser engraving machines, laser engraving systems, laser cutting machines, laser cutting systems.
    - Also terrific for owners of CO2 glass tube lasers, CO2 and YAG laser markers, laser marking machines, fiber laser marking machines.
    - It even works with RF lasers manufactured by Synrad, Coherent, Rofin, Universal Laser, Epilog Laser, Universal Laser Systems, Gravograph, Pinnacle. Also, CO2 glass tube lasers including RECI, EFR, Jilin Yong Li, Mactron Technology, North Star Electron, Shanghai Jinke Intelligent Technology, YL Lasers, Prima, Trumpf, RPC laser.
    - It works with laser machines made by Rabbit Laser, GW Weike, Yueming, Hans Laser, Beijing New Power, Chuntian, Foshan Beyond, Grand Bird, Jinan XYZ, Perfect Laser, Suke...

    Get your quick laser power output reading today and exercise your warranty as needed.

    Ensure the best quality of the laser cutting and engraving now.

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Risk free laser tube/buying with CO2 Laser Power Meter Probe 0-200 watts.-chinese_co2_laser_engraver_cartoon_tiny-jpg  


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Risk free laser tube/buying with CO2 Laser Power Meter Probe 0-200 watts.

Risk free laser tube/buying with CO2 Laser Power Meter Probe 0-200 watts.