CNC ROUTER NEW HERMES VANGUARD 3400 ENGRAVER LET'S DEAL

Results 1 to 2 of 2

Thread: CNC ROUTER NEW HERMES VANGUARD 3400 ENGRAVER LET'S DEAL

  1. #1
    Registered
    Join Date
    Mar 2010
    Location
    US of A
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default CNC ROUTER NEW HERMES VANGUARD 3400 ENGRAVER LET'S DEAL

    Nice New Hermes Vanguard 3400 Engraver, Serial #V34Z 4310. Table only, no EP Driver Module or Software. Easily construct a Driver Module from parts available here on ebay, about $150.00. Use Mach 3 software to run machine direct from Windows PC. Mach 3 G-code software can be purchased at Mach 3's website or they also have a free version that stops at 1000 lines of code (a huge amount for engraving or cnc routing.) Working area of table is approximately 12 x, 9 y, 2" z. Excellent heavy duty machine for simple conversion to cnc routing table. Stepper motors are EAD brand 6 wire ( i have the wire designations.) Checked serial number with N-H, table is late 1994 vintage. Customer used this machine to engrave tags for certain product items, it saw limited use. Customer needed larger working area, purchased new machine in 2005, this machine has been idle, shrink wrapped since. New machine adopted EP Module & Software. Sold "AS IS" "WHERE IS". Local pick-up only, you'll be planning a road trip. I am just an hour North of Detroit. Can be $persuaded$ to ship to your locale, would require crating at additional charge and your freight transit company's account number. N-H guy sez $1000.00 is a very fair price for a 3400 table! Give me a shout, I'm up for a deal...


    http://cgi.ebay.com/ws/eBayISAPI.dll...STRK:MESELX:IT

    Similar Threads:


  2. #2
    Member
    Join Date
    Jul 2017
    Location
    United States
    Posts
    347
    Downloads
    0
    Uploads
    0

    Default Re: CNC ROUTER NEW HERMES VANGUARD 3400 ENGRAVER LET'S DEAL

    hi i just got a very old new hermes vanguard 3400 engraver and need to reset the time date due to bad cmos..which requires hooking up a monitor does anyone know if it requires a specific video card or can any isa video card be used..i have a very old 8bit isa 9pin video card i was going to try



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

CNC ROUTER NEW HERMES VANGUARD 3400 ENGRAVER LET'S DEAL

CNC ROUTER NEW HERMES VANGUARD 3400 ENGRAVER LET'S DEAL