Hi Luca,
2 Step/Dir on JP4 can be used. But all the pins on JP6 are used by Konnect.
Hello there,
I was wondering if I can use the multiplexed Step/Dir-signals from JP7 to JP4 and JP6 when there is a KONNECT on the JP6.
My setup:
- KFLOP
- KANALOG
- KONNECT
Thank you in advance and
greetings
Luca Peschel
Similar Threads:
Hi Luca,
2 Step/Dir on JP4 can be used. But all the pins on JP6 are used by Konnect.
Regards
TK http://dynomotion.com