RTCP 5 axis on Kflop card vers. 1.1 for an horizontal mill A/B table-table

[dariocnc]

Hi there
my name is Dario from Italy, I am building an horizontal 5 axis mill machine (table/table) A/B, and I have the opportunity to buy from a friend of mine a Kflop card very.1.1
I kindly ask you if this card version can support an RTCP setup for my machine and which are the main differences with the actual version of the card 1.2.
Thanks in advance for your support



Similar Threads:

• Tool Offset issue with RTCP on KFLOP 5 Axis
• Drilling operation on Cross table type Horizontal Boring Mill
• FERMAT Table Type Horizontal Boring Mill WFT 13 CNC
• How to drill and face mill using table type horizontal boring mill
• Horizontal mill index table orientation parameter

[TomKerekes]

Hi dario,

The only difference that should matter to you between KFLOP Rev 1.1 and the current KFLOP Rev 1.3 is that Rev 1.3 has better protection against noise coming in the #RESET connector pins.

[dariocnc]

Many thanks Tom
great support from Dynomotion!