Hi CNCtronic,
I would have expected the number to be:i need to configure the "Step per" parameters (Menù: Config->Motor tuning ) on Match3 software
A simple CNC milling 3 axis
Ball screw shaft are 1605 (5 mm stroke with one turn)
Motors: Stepper NEMA23 1.8° - 200 pulse for 1 rev
The stepper Drive (DM556) are setting with 25600 Pulse/rev (the maximum for smooth movements)
In the "Step per" field on Match3 i set (for successive approximations) 15000
With this number (15000) i not have a good precision but seems to be the best value
25600 steps/rev x (1rev / 5mm) = 5120 steps / mm
Is the motor connected 1:1 to the Ball Screw?
If you command KFLOP to move the motor 25600 steps does it make 1 revolution?
Output Gain can be used to scale motion. But we recommend leaving Output Gain set at 1.0 (or -1.0) so KFLOP operates in raw steps.The question is: There is some parameters to setting in init file (the first called task) on Kflop?