Is my KFLOP a supported version?


Results 1 to 6 of 6

Thread: Is my KFLOP a supported version?

  1. #1
    Registered
    Join Date
    Feb 2010
    Location
    Denmark
    Posts
    23
    Downloads
    0
    Uploads
    0

    Default Is my KFLOP a supported version?

    Hi,

    I bought a KFLOP some years back, but never got around to use it.

    I now have a project where I want to use the board, but I am unsure if the version of KFLOP I have is still a current version.

    On the PCB it says KFLOP rev 1.2. Is this still a supported version of KFLOP?

    Best regards
    Jacob

    Similar Threads:


  2. #2
    Member TomKerekes's Avatar
    Join Date
    May 2006
    Location
    USA
    Posts
    4043
    Downloads
    0
    Uploads
    0

    Default Re: Is my KFLOP a supported version?

    Hi Jacob,

    The only difference between KFLOP Rev 1.2 and the current KFLOP Rev 1.3 is additional noise filtering on the KFLOP Reset input. With long cables and signal cross talk or in a noisy evironment could sometimes cause KFLOP to reset. Otherwise they are identical.

    Here is a post showing a method of adding a 0.001uF Ceramic Capacitor near KFLOP to make is the same as a Rev 1.3 board.
    https://www.cnczone.com/forums/dynom...ml#post1661110

    HTH

    Regards
    TK http://dynomotion.com


  3. #3
    Registered
    Join Date
    Feb 2010
    Location
    Denmark
    Posts
    23
    Downloads
    0
    Uploads
    0

    Default Re: Is my KFLOP a supported version?

    Quote Originally Posted by TomKerekes View Post
    Hi Jacob,

    The only difference between KFLOP Rev 1.2 and the current KFLOP Rev 1.3 is additional noise filtering on the KFLOP Reset input. With long cables and signal cross talk or in a noisy evironment could sometimes cause KFLOP to reset. Otherwise they are identical.

    Here is a post showing a method of adding a 0.001uF Ceramic Capacitor near KFLOP to make is the same as a Rev 1.3 board.
    https://www.cnczone.com/forums/dynom...ml#post1661110

    HTH
    Hi Tom,

    Thanks for the answer. I will add the capacitor and run with my current board.

    Thanks for the answer.

    Best regards
    Jacob



  4. #4
    Registered
    Join Date
    Jan 2006
    Location
    USA
    Posts
    16
    Downloads
    0
    Uploads
    0

    Default Re: Is my KFLOP a supported version?

    I have the same question as well, except mine is KFLOP REV 1.1

    I really need to retire so I'll have some time to use all this cool stuff!



  5. #5
    Member TomKerekes's Avatar
    Join Date
    May 2006
    Location
    USA
    Posts
    4043
    Downloads
    0
    Uploads
    0

    Default Re: Is my KFLOP a supported version?

    Hi frostheave,

    Yes it should be software compatible.

    Regards
    TK http://dynomotion.com


  6. #6
    Registered
    Join Date
    Jan 2006
    Location
    USA
    Posts
    16
    Downloads
    0
    Uploads
    0

    Default Re: Is my KFLOP a supported version?

    Excellent. Thank-you Tom.
    I will also add the cap.
    I'm looking forward to finally using the KFLOP.

    Bob



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Is my KFLOP a supported version?

Is my KFLOP a supported version?