Updated drawing


Results 1 to 2 of 2

Thread: Updated drawing

  1. #1
    Registered
    Join Date
    May 2017
    Location
    United States
    Posts
    67
    Downloads
    0
    Uploads
    0

    Default Updated drawing

    Updated the drawing I submitted that was put on the Wiki site.

    Updated drawing includes grounding of shields for limit switches, grounding of spindle and VFD, energy dump circuit, removed erroneous grounds to chassis I wired originally and includes a forth axis to use either a Stepper motor or Servo motor. All has been tested except the servo motor circuit for a forth axis, I have not built the 4th axis yet and have not decided if I will use a stepper or servo, I am leaning towards a servo for the higher torque at higher speeds.

    I hope the intermittent G code error is now fixed with removing the erroneous chassis grounds I wired.

    Please remove my original drawing from the Wiki site and if you want post the new one.

    Joe

    Similar Threads:
    Attached Files Attached Files


  2. #2
    Gold Member TomKerekes's Avatar
    Join Date
    May 2006
    Location
    USA
    Posts
    2991
    Downloads
    0
    Uploads
    0

    Default Re: Updated drawing

    Hi Joe,

    Updated.

    Thank you



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Updated drawing

Updated drawing