DSP_Kmotion.out Date Stamp


Results 1 to 3 of 3

Thread: DSP_Kmotion.out Date Stamp

  1. #1
    Registered
    Join Date
    May 2013
    Location
    USA
    Posts
    58
    Downloads
    0
    Uploads
    0

    Default DSP_Kmotion.out Date Stamp

    Hi Tom and anyone else who has seen this error,

    I have been running a waterjet with Mach 3, Kmotion and Kanalogue for over a year but on Sunday it started cutting then faulted and threw a DSP_Kmotion.out Date Stamp doesn't Match Kmotion Firmware (full error attached). I powered down and back up same error, then I installed the current stable Kmotion from the website and flashed the firmware and tried again. Same issue, I tried a few times with no improvement

    I have a spare Kmotion board for another project which I can switch out if we think it is dead .

    Thoughts?

    DSP_Kmotion.out Date Stamp-img_20181014_152807-1-jpg

    Cheers

    Chris

    Similar Threads:


  2. #2
    Gold Member TomKerekes's Avatar
    Join Date
    May 2006
    Location
    USA
    Posts
    2967
    Downloads
    0
    Uploads
    0

    Default Re: DSP_Kmotion.out Date Stamp

    Hi Chris,

    That looks like Status Data is somehow being mixed with Version data. That would more likely be a Version/Software/Mach3/Windows problem rather than a hardware problem with KFLOP.

    Can you run KMotion.exe and request the Version from the Console? Can you Compile/Download/Execute C Programs with KMotion.exe?

    You might check the registry entry used by Mach3 to find the correct Version of KMotion Libraries:

    Use regedit to check if
    \Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\App Paths\Mach3.exe contains a path entry to the \KMotion\Release directory of the installed version of KMotion.



  3. #3
    Registered
    Join Date
    May 2013
    Location
    USA
    Posts
    58
    Downloads
    0
    Uploads
    0

    Default Re: DSP_Kmotion.out Date Stamp

    I will check the registry and the compile/download/execute

    I did the version in the console and received 3.34.

    Cheers

    Chris



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

DSP_Kmotion.out Date Stamp

DSP_Kmotion.out Date Stamp