SBL Magnaturn Retrofit - Page 2


Page 2 of 6 FirstFirst 12345 ... LastLast
Results 13 to 24 of 65

Thread: SBL Magnaturn Retrofit

  1. #13
    Registered Need TECH Help!'s Avatar
    Join Date
    Dec 2007
    Location
    United States
    Posts
    412
    Downloads
    0
    Uploads
    0

    Default Re: SBL Magnaturn Retrofit

    Got some electrical components mounted....

    Attached Thumbnails Attached Thumbnails SBL Magnaturn Retrofit-topbox1-jpg   SBL Magnaturn Retrofit-topbox2-jpg   SBL Magnaturn Retrofit-topbox3-jpg   SBL Magnaturn Retrofit-custommiddlebox1-jpg  

    SBL Magnaturn Retrofit-bottombox1-jpg  
    http://www.homecncstuff.elementfx.com/


  2. #14
    Gold Member TomKerekes's Avatar
    Join Date
    May 2006
    Location
    USA
    Posts
    2931
    Downloads
    0
    Uploads
    0

    Default Re: SBL Magnaturn Retrofit

    Hi Troy,

    I see you kept the fan. Whats the plan for the door to the 3.5inch floppies to be used for?

    Help with identifiyng Southbend Magnaturn-southbend-bridgeport-cnc-lathe-004-jpg



  3. #15
    Registered Need TECH Help!'s Avatar
    Join Date
    Dec 2007
    Location
    United States
    Posts
    412
    Downloads
    0
    Uploads
    0

    Default Re: SBL Magnaturn Retrofit

    Hay Tom,
    Boy.... wish my lathe was as clean as the one in your picture The door will eventually have USB ports.

    http://www.homecncstuff.elementfx.com/


  4. #16
    Registered Need TECH Help!'s Avatar
    Join Date
    Dec 2007
    Location
    United States
    Posts
    412
    Downloads
    0
    Uploads
    0

    Default Re: SBL Magnaturn Retrofit

    .

    http://www.homecncstuff.elementfx.com/


  5. #17
    Registered
    Join Date
    May 2012
    Location
    canada
    Posts
    315
    Downloads
    0
    Uploads
    0

    Default Re: SBL Magnaturn Retrofit

    Nice work on the electrical enclosure. I like your welding bench, how its enclosed and storage underneath. Do you have a fume extractor or something up top? I bet it would work really well like that.



  6. #18
    Registered Need TECH Help!'s Avatar
    Join Date
    Dec 2007
    Location
    United States
    Posts
    412
    Downloads
    0
    Uploads
    0

    Default Re: SBL Magnaturn Retrofit

    Quote Originally Posted by mmurray70 View Post
    Nice work on the electrical enclosure. I like your welding bench, how its enclosed and storage underneath. Do you have a fume extractor or something up top? I bet it would work really well like that.
    Thanks.
    No, but there is a big exhaust fan in wall beside it that does the job very well. Now that you mention it i could easily duct to it and use a smaller fan for welding and such

    http://www.homecncstuff.elementfx.com/


  7. #19
    Registered Need TECH Help!'s Avatar
    Join Date
    Dec 2007
    Location
    United States
    Posts
    412
    Downloads
    0
    Uploads
    0

    Default Re: SBL Magnaturn Retrofit

    Here is a video of making the Zaxis Ballscrew nut for lathe. I used Fusion360 for the High Speed Toolpath code and using my Dynomotion retrofitted Hurco mill.


    http://www.homecncstuff.elementfx.com/


  8. #20
    Registered Need TECH Help!'s Avatar
    Join Date
    Dec 2007
    Location
    United States
    Posts
    412
    Downloads
    0
    Uploads
    0

    Default

    Last but not least the Dynomotion boards are mounted.

    Attached Thumbnails Attached Thumbnails SBL Magnaturn Retrofit-boardsonrail-jpg  
    http://www.homecncstuff.elementfx.com/


  9. #21
    Registered Need TECH Help!'s Avatar
    Join Date
    Dec 2007
    Location
    United States
    Posts
    412
    Downloads
    0
    Uploads
    0

    Default

    Is the CNC Zone website no more? Had to post this on IndustryArena.

    http://www.homecncstuff.elementfx.com/


  10. #22
    Registered Need TECH Help!'s Avatar
    Join Date
    Dec 2007
    Location
    United States
    Posts
    412
    Downloads
    0
    Uploads
    0

    Default

    I have a 240VAC to 120VAC single phase control transformer(open frame). Do i ground it at the frame of transformer?
    Troy

    http://www.homecncstuff.elementfx.com/


  11. #23
    Registered Need TECH Help!'s Avatar
    Join Date
    Dec 2007
    Location
    United States
    Posts
    412
    Downloads
    0
    Uploads
    0

    Default Re: SBL Magnaturn Retrofit

    Quote Originally Posted by Need TECH Help! View Post
    Last but not least the Dynomotion boards are mounted.
    Try this one again. Think it got lost when i used the IndustryArena.

    Attached Thumbnails Attached Thumbnails SBL Magnaturn Retrofit-boardsonrail-jpg  
    http://www.homecncstuff.elementfx.com/


  12. #24
    Registered Need TECH Help!'s Avatar
    Join Date
    Dec 2007
    Location
    United States
    Posts
    412
    Downloads
    0
    Uploads
    0

    Default Re: SBL Magnaturn Retrofit

    I have a 240VAC to 120VAC single phase control transformer(open frame). Do i ground it at the frame of transformer?
    Troy

    http://www.homecncstuff.elementfx.com/


Page 2 of 6 FirstFirst 12345 ... LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

SBL Magnaturn Retrofit

SBL Magnaturn Retrofit