Need Help! Kmotion Kflop - Win 10 Driver: On Windows 10 Enterprise 2016 LTSB (IoT)


Results 1 to 2 of 2

Thread: Kmotion Kflop - Win 10 Driver: On Windows 10 Enterprise 2016 LTSB (IoT)

  1. #1
    Registered jeffserv's Avatar
    Join Date
    Jul 2004
    Posts
    221
    Downloads
    0
    Uploads
    0

    Cool Kmotion Kflop - Win 10 Driver: On Windows 10 Enterprise 2016 LTSB (IoT)

    Greetings,

    I have purchased a LattePanda 4G Ram 64GB: mini computer... and I am testing this, for use as a machine control.

    Win 10 Driver: On Windows 10 Enterprise 2016 LTSB (IoT)

    The problem is, I have went through the normal install; and the Device Manager, thinks this is a Com Port??? Com3 when I plug it in... I update the driver, and it is still a com port.. and never shows up in the USB devices section?

    I have not experienced this on other computers, like the Mini-itx boards I have used?

    I have the computer in Test Mode, as instruction advise for install. Still no success?

    Any help would be appreciated.

    Sincerely,

    - Jeff R.

    Similar Threads:
    GOLDCNC5, BLUECNC4, GreenCNC3, RedCNC2L, SilverCNC2; CNC Software!
    www.truemachinedesign.com - - - - - - - - - www.truemachineautomation.com


  2. #2
    Gold Member TomKerekes's Avatar
    Join Date
    May 2006
    Location
    USA
    Posts
    2828
    Downloads
    0
    Uploads
    0

    Default Re: Kmotion Kflop - Win 10 Driver: On Windows 10 Enterprise 2016 LTSB (IoT)

    Hi Jeff,

    The latest Drivers are digitally signed by Dynomotion and should no longer require and it is not recommended to use Test Mode. See:
    Dynomotion

    The drivers have an option to also load a COM port driver. But this should be disabled by default. And should not be a problem if it is also loaded.

    You might try removing the driver and select the option to remove software. Then Update and navigate to our Drivers.

    You might post screen shots of the steps that you are following and what the responses are.

    I haven't heard of such an issue, but not aware of anyone using that PC.

    Regards

    TK
    http://dynomotion.com


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Kmotion Kflop - Win 10 Driver: On Windows 10 Enterprise 2016 LTSB (IoT)

Kmotion Kflop - Win 10 Driver: On Windows 10 Enterprise 2016 LTSB (IoT)