I have very little experience with C programming.
I’m am looking for a C program to probe a 3D surface and create the output file in a comma-delimited file or another format to create a point cloud. File will be used to create a 3D machining program.
I’m only using Kflop, Kanalog, Konnect, &KMotionCNC to run my machine which is a custom retrofit from a Yamaha X Y Z robot.

Also, I have a G-Code program that I found online. It uses G38.3 and macro variables. is there a plan to add G38.x Straight probe to the EMC.var file?

Similar Threads: