external step dir signals


Results 1 to 7 of 7

Thread: external step dir signals

  1. #1
    Registered
    Join Date
    Oct 2014
    Posts
    9
    Downloads
    0
    Uploads
    0


  2. #2
    Gold Member TomKerekes's Avatar
    Join Date
    May 2006
    Location
    USA
    Posts
    2719
    Downloads
    0
    Uploads
    0

    Default Re: external step dir signals

    Hi dmoglianesi,

    I don't fully understand your question. But yes KFLOP has Step/Dir Outputs. See:
    Step and Direction Setup

    Regards

    TK
    http://dynomotion.com


  3. #3
    Registered
    Join Date
    Oct 2014
    Posts
    9
    Downloads
    0
    Uploads
    0

    Default Re: external step dir signals

    [QUOTE = TomKerekes; 2163902] Ciao dmoglianesi,

    non capisco appieno la tua domanda. Ma sì KFLOP ha uscite Step / Dir. Vedi: Consigli
    per l'impostazione passo e direzione

    [/ QUOTE]



  4. #4
    Registered
    Join Date
    Oct 2014
    Posts
    9
    Downloads
    0
    Uploads
    0

    Default Re: external step dir signals

    Dear Sir, I want to use an external signal, type gamepad or pulse generator, in real time and not in g-code and use kflop to control the motors in closed loop, thanks dalmazio



  5. #5
    Gold Member TomKerekes's Avatar
    Join Date
    May 2006
    Location
    USA
    Posts
    2719
    Downloads
    0
    Uploads
    0

    Default Re: external step dir signals

    Hi dalmazio,

    You can create a User Program for KFLOP to monitor an MPG (Manual Pulse Generator) and move one or motor axes (open or closed loop). You might download our software and look at the MPGSmooth.c example and see is if you can understand it.

    Regards

    TK
    http://dynomotion.com


  6. #6
    Registered
    Join Date
    Oct 2014
    Posts
    9
    Downloads
    0
    Uploads
    0

    Default Re: external step dir signals

    thanks, I certainly do not understand anything, but with your help I hope to succeed, first thing? what kind of signal and what inputs to use, thank you



  7. #7
    Gold Member TomKerekes's Avatar
    Join Date
    May 2006
    Location
    USA
    Posts
    2719
    Downloads
    0
    Uploads
    0

    Default Re: external step dir signals

    Hi dmoglianesi,

    Its hard to help someone when all they say is they don't understand anything.

    What signals and inputs are you referring to?

    Regards

    TK
    http://dynomotion.com


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

external step dir signals

external step dir signals