Build Thread MAHO 600E - Page 3


Page 3 of 3 FirstFirst 123
Results 25 to 28 of 28

Thread: MAHO 600E

  1. #25
    Gold Member TomKerekes's Avatar
    Join Date
    May 2006
    Location
    USA
    Posts
    2877
    Downloads
    0
    Uploads
    0

    Default Re: MAHO 600E

    Hi swat cat,

    We don't have an examples for that with Mach3. You might consider 3 approaches:

    #1 - change SetFROwithPot.c to call SetFRO() within KFLOP instead of sending a request to KMotionCNC (which Mach3 would ignore). The disadvantage here is that the Mach3 FRO will not update and be out of sync with the Potentiometer. The FRO should have an immediate effect.

    #2 - Create a C Program to periodically read the ADC and place the value into a KFLOP Persist Variable. Create a Mach3 macro pump Basic program that periodically runs and requests the variable into a Mach3 DRO and commands the Mach3 FRO based on the value. In this way the On Screen FRO should basically show the Potentiometer Value. There will be a delay before any buffered trajectory sees the effect.

    #3 - switch to KMotionCNC

    Regards

    TK
    http://dynomotion.com


  2. #26
    Registered
    Join Date
    Jul 2013
    Posts
    18
    Downloads
    0
    Uploads
    0

    Default Re: MAHO 600E

    Hello. i have kanalog and i use 3 axis with closed loop +/-10v.

    I need a 4th axis to wire with step dir.
    Can i use jp4 or jp6 with a logic converter to 5v?

    Sent from my SM-A510F using Tapatalk



  3. #27
    Registered
    Join Date
    Jul 2013
    Posts
    18
    Downloads
    0
    Uploads
    0

    Default Re: MAHO 600E

    Or on the kanalog board can i use opto out jp13?

    Sent from my SM-A510F using Tapatalk



  4. #28
    Gold Member TomKerekes's Avatar
    Join Date
    May 2006
    Location
    USA
    Posts
    2877
    Downloads
    0
    Uploads
    0

    Default Re: MAHO 600E

    Hi swat cat,

    Kanalog opto outputs are not Step/Dir Outputs. For a solution see:
    Dynomotion Motion Control Boards for CNC Manufacturing and Robotics Applications

    Regards

    TK
    http://dynomotion.com


Page 3 of 3 FirstFirst 123

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

MAHO 600E

MAHO 600E