Hi Pete,
Thanks for taking the time to post back.
Hi Pete,
Thanks for taking the time to post back.
Regards
TK http://dynomotion.com
Hi Peter,
I don't see the C Program.
Is the C Program setting the bit as an output? With
SetBitDirection(35,1);
Regards
TK http://dynomotion.com
Hi Peter,
Cnczone doesn't allow .c files. You can add a .txt extension or zip it as you did.
SetBit() will set a bit but it must be configured as an output first. I don't see its direction ever configured. By default bits are inputs. Add the SetBitDirection(35,1); to your Initialization program.
Regards
TK http://dynomotion.com