Hi Amit,
Now I'm confused and don't understand.
Yes I saw you made that change.I found one pattern. in Kinematics5AxisTableAC.cpp file ASaddleZCenterpoint = 0.511811023 is modified in my machine and it is now ASaddleZCenterpoint = 1.023622047.
No that value isn't used anywhere else and you should be compiling not me.Have you included this old value ASaddleZCenterpoint = 0.511811023 somewhere. if yes then please change it to updated value ASaddleZCenterpoint = 1.023622047.
and then compile.
I don't understand. I'm guessing you think the TCP is not correcting Y correctly because the ASaddleZCenterpoint is wrong.because When i am running tcp, my tcp optimisation value of Y is always 13 mm more. as i said above center of rotation is 13 mm earlier but its now modified to 26mm.
Because you said you replaced the file and TCP works correctly there should not be anything required to change in other files. Did I understand that correctly?. Did you really replace the old file and prove that it works correctly?Answer 5- yes tcp is working after replacing the old file.
Regards