Dyna Path Delta CNC system


Results 1 to 2 of 2

Thread: Dyna Path Delta CNC system

  1. #1
    Member rscot9399's Avatar
    Join Date
    Jan 2022
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Dyna Path Delta CNC system

    So I stumbled upon a guy selling a 1995 dynapath system on Craigslist. The CRT was non functioning but I can fix that.
    The motors looked brand new and seem to be big bucks to replace.
    They are Baldor MTE-4090-Special

    High voltage servo drives. I have the complete system. I was considering doing a retro fit with this system to use it with linux CNC or Mach 3/4

    is it worth is? Should I just sell it as parts to someone needing Dynapath stuff?

    Much of it looks like its in great condition and it came off a running machine.

    Is this worth anything? Is it worth my time?

    I even have all the manuals and such. Any thoughts? Thanks

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Dyna Path Delta CNC system-screen-shot-2022-01-23-4-48-a  


  2. #2
    Member
    Join Date
    Aug 2011
    Location
    Canada
    Posts
    121
    Downloads
    0
    Uploads
    0

    Default Re: Dyna Path Delta CNC system

    Worth it/worth your time? Depends on your resources and skills, only you know about that.

    My observations:
    - Do you know what machine the control came from? Do you have access to full schematic diagram and features?
    - Your intended machine will have to match the original machine configuration reasonably closely.
    - Changing the PLC program will be a huge pain if you don't have access to the source code.
    - I don't see any spindle drive components (contactors, fuse block, etc).
    - The servo drives are analog +/- 10V, not compatible with Mach CNC software as far as I know. LinuxCNC can handle that though.
    - I don't see the 1 to 2 kW transformer to power the servo drives.

    The monitor has a standard VGA connection if you want to test the control.

    RT



  3. #3
    Rorisman7930's Avatar
    Join Date
    Jan 2023
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: Dyna Path Delta CNC system

    hola, tienes informacion de como ajustar un servo amplificador sdfp1525-17 de los antiguos ( servo dynamics aw1450 . jun1993 )???
    Tengo un problema con un control dynapath delta 40m y necesito ajustar los servoamplificadores de los ejes.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Dyna Path Delta CNC system

Dyna Path Delta CNC system