Copying FIles getting Changed


Results 1 to 3 of 3

Thread: Copying FIles getting Changed

  1. #1
    ejg3855's Avatar
    Join Date
    Mar 2019
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Copying FIles getting Changed

    I am having some trouble copying files from HDD or Floppy to T4 Parts Program Directory.

    When I do smaller files say 20Kb or less I don't seem to have any problems. I am currently trying to import a 135Kb file and it does something during the "editing" part of the process that changes it to 29Kb and the Gcode is all garbled.

    The only thing I can surmize here might be that I have to many lines of code from the CAM?

    Help?



  2. #2
    ejg3855's Avatar
    Join Date
    Mar 2019
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: Copying FIles getting Changed

    Turns out N9999 is the max on the Dynapath controller we have. Resolved.



  3. #3
    Member machinehop5's Avatar
    Join Date
    Aug 2009
    Location
    United States
    Posts
    1566
    Downloads
    5
    Uploads
    2

    Default Re: Copying FIles getting Changed

    Quote Originally Posted by ejg3855 View Post
    Turns out N9999 is the max on the Dynapath controller we have. Resolved.
    ...yes, Setup your post processor to start renumbering after N9999 Max then N0001 again. Also, you can insert/add blocks if and when editing using a decimal point. Nxxxx.xxx format of 4 place before and 3 place after decimal point.



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Copying FIles getting Changed

Copying FIles getting Changed