- Problem- odd problem missing blocks with Buffered Input...aka DNC drip feeding a Dynapath 50MU
-
Member
odd problem missing blocks with Buffered Input...aka DNC drip feeding a Dynapath 50MU
...discovered a odd problem when using the Buffered input on a Dynapath 50MU....the problem seems to be affecting only the last 200-300 blocks at the end of every program I've tried. The blocks are missing. This also happens when Transferring programs to the Dynapath's HDD or to the FDD via Serial Port with Bobcad 23 Predator CNC software and using a Moxa 5210A serial to IP unit....but when transferring to the Part Program memory of the Dynapath works fine, but limited to 192k
...I'm thinking this maybe a early Dynapath 50MU bug
Similar Threads:
-
-
Member
Re: odd problem missing blocks with Buffered Input...aka DNC drip feeding a Dynapath
So this chops off 200 to 300 blocks regardless of program size? Are you outputting Dynapath or EIA code? Could you add 300 blocks after the M30 just to see if it would get you to the end of your program? Alternatively, you could try 300 G0 moves with X0/ Y0/ Z0/ before the M30.
RT
-
Member
Re: odd problem missing blocks with Buffered Input...aka DNC drip feeding a Dynapath
...Hi RT,
.. found the problem...for some reason the Moxa 5210A unit is dumping the last 200-300 blocks. It maybe something is not set correctly but, I tried for days (pull hair here) every setting possible was driving me nuts.
https://www.moxa.com/en/products/ind...es/nport-5210a
.. switched to a old Quatech SSE-100D unit and the Buffered Input and file transfers work perfectly now at 19.2k.
https://www.ebay.com/sch/i.html?_fro...h+dd&_osacat=0
Quatech had website support a year or two ago but, I can not find it right now...or maybe they are out of business now.
https://www.bb-elec.com/Tech-Support...r-Drivers.aspx search SSE-100D...I see they have Linux drivers too
DJ
Last edited by machinehop5; 09-20-2021 at 03:13 PM.
Reason: Quatech link
-
Member
Re: odd problem missing blocks with Buffered Input...aka DNC drip feeding a Dynapath
Good thing you had a backup!
- Problem- odd problem missing blocks with Buffered Input...aka DNC drip feeding a Dynapath 50MU
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules