Need Help! Software problem


Results 1 to 8 of 8

Thread: Software problem

  1. #1
    Member Mikeordaz's Avatar
    Join Date
    Sep 2021
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Software problem

    I have a dynapath delta 50M control but when i turn on the following messages appear

    "Power fail: part program and setup information must be reload"

    And

    "Cycle power to continue. Watchdog timer si tripped"

    Similar Threads:


  2. #2
    Member cncmakers001's Avatar
    Join Date
    Jul 2011
    Location
    China
    Posts
    235
    Downloads
    1
    Uploads
    3

    Default Re: Software problem

    Quote Originally Posted by Mikeordaz View Post
    I have a dynapath delta 50M control but when i turn on the following messages appear

    "Power fail: part program and setup information must be reload"

    And

    "Cycle power to continue. Watchdog timer si tripped"
    Looks like hardware problem caused this problem.

    http://cncmakers.com/cnc/controllers/CNC_Controller_System/CNC_Retrofit_Package.html


  3. #3
    Member Algirdas's Avatar
    Join Date
    Mar 2009
    Location
    United Arab Emirates
    Posts
    1681
    Downloads
    0
    Uploads
    0

    Default Re: Software problem

    Watchdog points to hardware problem. Software is generating the message, so software is correct. Check the power supply and if the CPU is seated in the socket well.



  4. #4
    Member Mikeordaz's Avatar
    Join Date
    Sep 2021
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by Algirdas View Post
    Watchdog points to hardware problem. Software is generating the message, so software is correct. Check the power supply and if the CPU is seated in the socket well.
    what are the correct values in the power supply?



  5. #5
    Member machinehop5's Avatar
    Join Date
    Aug 2009
    Location
    United States
    Posts
    1122
    Downloads
    5
    Uploads
    2

    Default Re: Software problem

    Quote Originally Posted by Mikeordaz View Post
    I have a dynapath delta 50M control but when i turn on the following messages appear

    "Power fail: part program and setup information must be reload"

    And

    "Cycle power to continue. Watchdog timer si tripped"
    ...check the Battery voltage on the SRAM Card....should be above 3.1vdc. Replacement is easy with add-on battery pack because there 3 Pin plug for battery.

    ...to clear the Watchdog Timer you might need the CNC.EXE Floppy reloaded after Battery updating.

    Attached Thumbnails Attached Thumbnails Software problem-june2019-001-2-jpg   Software problem-512k-sram-chip-jpg   Software problem-128k-sram-chips-jpg   Software problem-feb2020-008-jpg  



  6. #6
    Member Mikeordaz's Avatar
    Join Date
    Sep 2021
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by machinehop5 View Post
    ...check the Battery voltage on the SRAM Card....should be above 3.1vdc. Replacement is easy with add-on battery pack because there 3 Pin plug for battery.

    ...to clear the Watchdog Timer you might need the CNC.EXE Floppy reloaded after Battery updating.
    Where can i get cnc.exe???



  7. #7
    Member machinehop5's Avatar
    Join Date
    Aug 2009
    Location
    United States
    Posts
    1122
    Downloads
    5
    Uploads
    2

    Default Re: Software problem

    ...Dynapath is still in business, but they will what to sell you a Floppy upgrade $300+CNC exe cost. Call or email them with your Serial Number of the CNC control you have.
    https://www.dynapath.com/services.php
    good luck..and lets us know how much the CNCEXE costs ya, IF you need it.
    DJ



  8. #8
    Member
    Join Date
    Sep 2017
    Location
    United States
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: Software problem

    Quote Originally Posted by cncmakers001 View Post
    Looks like hardware problem caused this problem.
    What was the outcome. I got the same message after we replaced the battery. Very frustrating.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Software problem

Software problem

Software problem