Need Help! Dynapath & AD GS23-2010 VFD


Results 1 to 2 of 2

Thread: Dynapath & AD GS23-2010 VFD

  1. #1
    Member Wpelt's Avatar
    Join Date
    Apr 2021
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Dynapath & AD GS23-2010 VFD

    Hello,

    I have a Tree 325 (Dynapath Delta 20M) with a VS-626MT III Spindle Drive Controller (Fried/Toast).

    I have a Automation Direct GS23-2010 that I have already hooked up / configured to work with the Yaskawa UAASKA-04CA1

    My next hurdle is to get the Dynapath Delta 20M to "talk" to the GS23 VFD. Looking through all the documentation I have on the Tree & the Dynapath I can not seem to find where to land the cw/ccw terminals & the speed control terminals from the VFD to the Dynapath.

    Has anyone done this before / know if this is even possible?

    I am able to get the Dynapath to start the VFD/motor via the 12CRE relay and the E-Stop to work vie the 1CRE relay

    Also would it be possible to get the motor encoder to talk directly to the Dynapath so it wont spit out the "Drive not up to speed error"

    The documentation I have on all components are in the google drive link below.

    https://drive.google.com/drive/folde...-V?usp=sharing

    Any help is greatly appreciated.

    Thanks

    Similar Threads:


  2. #2
    Member machinehop5's Avatar
    Join Date
    Aug 2009
    Location
    United States
    Posts
    990
    Downloads
    3
    Uploads
    1

    Default Re: Dynapath & AD GS23-2010 VFD

    ...there is an "Installation Manual" from Dynapath you need for Delta 20M Pinout's, Parameters, etc. The bad news is the manual cost $200+ from Dynapath.

    Dynapath & AD GS23-2010 VFD-dnyapath-10m-20m-install-jpg

    Last edited by machinehop5; 04-25-2021 at 09:47 AM. Reason: photo


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Dynapath & AD GS23-2010 VFD

Dynapath & AD GS23-2010 VFD

Dynapath & AD GS23-2010 VFD