Delta 1000 Rapid override


Results 1 to 4 of 4

Thread: Delta 1000 Rapid override

  1. #1
    Member
    Join Date
    Jan 2007
    Location
    Canada
    Posts
    311
    Downloads
    0
    Uploads
    0

    Default Delta 1000 Rapid override

    Helping someone out with a Delta 1000 (2005-ish) control on a lathe.
    We don't have a manual so kind of wandering in the dark for settings

    The rapid override switch controls the speed of the movements (I believe there are 3, maybe 4 settings, 100%, 75%, 50 and 25% type of thing) when it's in manual "jog" mode but doesn't have any affect on rapids during a program cycle (G00 moves)

    On another, older machine he has that is running an older version of the control (not 1000. I think it was 20 or 40) the override switch works as I believe it should by limiting the speed in both manual and program modes.

    Before I get into the wiring I was hoping there might be a parameter somewhere (There is the T0 and T1 in settings screen but really that just seems to turn off the switch all together)

    Thanks for any help
    M

    Similar Threads:


  2. #2
    Member machinehop5's Avatar
    Join Date
    Aug 2009
    Location
    United States
    Posts
    1567
    Downloads
    5
    Uploads
    2

    Default Re: Delta 1000 Rapid override

    ...MODE SELECT> 5(SETUP). TM2 or TM4 Enter should enable Rapid Overide

    DJ



  3. #3
    Member
    Join Date
    Jan 2007
    Location
    Canada
    Posts
    311
    Downloads
    0
    Uploads
    0

    Default Re: Delta 1000 Rapid override

    Thanks I'll try that.
    (that should allow the switch to slow down rapids during programed moves like I think it should right?)
    M



  4. #4
    Member
    Join Date
    Jan 2007
    Location
    Canada
    Posts
    311
    Downloads
    0
    Uploads
    0

    Default Re: Delta 1000 Rapid override

    OK, finally made it over to see the machine in person and it's not what I thought. I think I'd better start a new thread with a better title
    M



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Delta 1000 Rapid override

Delta 1000 Rapid override