post processor for dynapath delta10 - fusion 360


Results 1 to 5 of 5

Thread: post processor for dynapath delta10 - fusion 360

  1. #1
    Member
    Join Date
    Apr 2012
    Location
    USA
    Posts
    63
    Downloads
    0
    Uploads
    0

    Default post processor for dynapath delta10 - fusion 360

    any anyone tell me if the included dynapath post in fusion360 works with the delta10 controller?

    here is some sample gcode it generated. i think the program name needs to be added at the beginning but other than that - it should be fine?


    N100(T)1001$
    N101(T)Face3$
    N102(9)M3S10186T1$
    N103(9)M8$
    N104(0)X19.782Y-16.564$
    N105(0)Z37.225$
    N106(0)Z27.225$
    N107(1)Z22.378F3206.9$

    -----removed several hundred lines of code

    N640(1)X-18.626Y-22.292$
    N641(1)X-18.643Y-22.239$
    N642(1)X-18.647Y-22.226$
    N643(2)X-20.399Y-22.056I-19.558J-22.504D1$
    N644(0)Z37.225$
    N645(9)M9$
    N646(9)M30$
    END

    Similar Threads:


  2. #2
    Member machinehop5's Avatar
    Join Date
    Aug 2009
    Location
    United States
    Posts
    1567
    Downloads
    5
    Uploads
    2

    Default Re: post processor for dynapath delta10 - fusion 360

    ...your code looks about right. Sequence Numbers format is Nxxxx.xxx (yes decimal point is allowed I think) which is handy when editing a program. Program should start at N1 or N0001 and be spaced by 1 and when N9999 is reached just start numbering from N1 again also I think Dynapath Delta 10's want G91 Arc centers for G02 or G03

    Another CAD/CAM program https://www.freecadweb.org/downloads.php
    has a PP for Dynapath which surprised me. FreeCad is also totally free Open Source too.

    https://wiki.freecadweb.org/Path_Post
    DJ



  3. #3
    Member
    Join Date
    Apr 2012
    Location
    USA
    Posts
    63
    Downloads
    0
    Uploads
    0

    Default Re: post processor for dynapath delta10 - fusion 360

    i modified the post to correct the formatting of the program name and start at N001. Also disabled the tool changer option. i did a couple of test programs successfully!



  4. #4
    Member machinehop5's Avatar
    Join Date
    Aug 2009
    Location
    United States
    Posts
    1567
    Downloads
    5
    Uploads
    2

    Default Re: post processor for dynapath delta10 - fusion 360

    Quote Originally Posted by jaysihn View Post
    i modified the post to correct the formatting of the program name and start at N001. Also disabled the tool changer option. i did a couple of test programs successfully!
    ...nice. good job

    without cad/cam in the 1980's it was a nightmare and very costly to programming anything with contours. The only thing that maybe a problem (to me) with Fusion360 is what happens after the free part runs out.



  5. #5
    Member
    Join Date
    Apr 2012
    Location
    USA
    Posts
    63
    Downloads
    0
    Uploads
    0

    Default Re: post processor for dynapath delta10 - fusion 360

    Quote Originally Posted by machinehop5 View Post
    ...nice. good job

    without cad/cam in the 1980's it was a nightmare and very costly to programming anything with contours. The only thing that maybe a problem (to me) with Fusion360 is what happens after the free part runs out.
    yes, I expect that may happen but they've been offering it free for hobby use for years now. I know i first installed it about 3.5 years ago. If I can figure out a small cash flow from this machine I'd be willing to switch to the paid plan.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

post processor for dynapath delta10 - fusion 360

post processor for dynapath delta10 - fusion 360