Need Help! need to enter CMOS on Dynapath delta 50


Results 1 to 6 of 6

Thread: need to enter CMOS on Dynapath delta 50

  1. #1
    Member jmac429's Avatar
    Join Date
    May 2020
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default need to enter CMOS on Dynapath delta 50

    I had to replace the mother board battery on my Tree mill with Dynapath Delta 50 contol. but how do I enter into CMOS?. the Control has no F1, DEL button. there is no input for a keyboard either. Anyone know the secret?

    Please help.

    Similar Threads:


  2. #2
    Member
    Join Date
    Aug 2011
    Location
    Canada
    Posts
    121
    Downloads
    0
    Uploads
    0

    Default Re: need to enter CMOS on Dynapath delta 50

    Do you have an AT type keyboard or PS2 keyboard with 5 pin DIN adapter to plug into the keyboard port on the bottom of the Delta 50 control?

    RT



  3. #3
    Member jmac429's Avatar
    Join Date
    May 2020
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: need to enter CMOS on Dynapath delta 50

    my Delta 50 control does not have this adaptor. I searched all over even inside the cabinet.



  4. #4
    Member
    Join Date
    Aug 2011
    Location
    Canada
    Posts
    121
    Downloads
    0
    Uploads
    0

    Default Re: need to enter CMOS on Dynapath delta 50

    jmac429,

    The keyboard connector is on the Delta 50 motherboard. If your control is mounted in the traditional configuration with the cards on the bottom right, the keyboard connector will be on the underside of the control just to the left of the card slots. It should be a 5 pin DIN connector.

    You will need an old style PC keyboard with PS2 connector and a PS2 to AT adapter. I can take a picture later if you need.

    RT



  5. #5
    Member jmac429's Avatar
    Join Date
    May 2020
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: need to enter CMOS on Dynapath delta 50

    I found it!! Awesome! thank you very much.

    JM



  6. #6
    Member
    Join Date
    Aug 2011
    Location
    Canada
    Posts
    121
    Downloads
    0
    Uploads
    0

    Default Re: need to enter CMOS on Dynapath delta 50

    Glad the information was useful. I keep a keyboard inside the cabinet for occasional use.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

need to enter CMOS on Dynapath delta 50

need to enter CMOS on Dynapath delta 50