- reverse spindle question
-
Member
reverse spindle question
We have an Katsuga R-7 mill w/ Dynapath 20 control. When running the spindle and want to change direction, ex: m3 to m4 for regardless of rpm i am running, will not change directions. Have do an m5 then enter new direction. My question is this normal on some applications, or do i have a problem. The spindle drive is a Fanuc. Thanks.
Similar Threads:
-
- reverse spindle question
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules