Any one successful with RGB to LDC monitor swap?

[aussco]

I have looked for a new CRT and board but they range from $800 to $1200+ Just thought I would ask if anyone did a DIY monitor change to an LCD. I know the Delta 20 old is but she is mine and I am still having fun for now. By the way, what is this used for?

Similar Threads:

• Swap or No Swap? (mSATA drives)
• Successful participation in EMO Hannover 2013
• Spindle motor swap, or servo swap?

[elnerdo]

I don't think its possible to do on a Delta 20. To change out the display for an LCD, you'd need a VGA card which wasn't available on the Delta 20 (as far as I know).

Your picture shows a jog wheel. You turn it to move the axes in jog mode.

[gwiz]

You can not just add a board to the CNC. The Delta 10/20 were true CNC with all custom hardware. The 30?40/50/60 and Delta 2000 have a basis on PC hardware and can run VGA monitors without a real issue. As stated you would need a some type of converter to change the signal type to run one of today's monitors.

[rpseguin]

Are you actually asking what an MPG is for?

[john-100]

depending on the video standard of the original monitor you may find a converter to convert
the Delta's RGB output (possibly with syncs on Green o/p ) to SVGA

if the new SVGA monitor is able to lock to the Delta video line & frame rate
you may only need a simple converter to convert the original sync signal to the separate Horizontal sync & Vertical sync for the SVGA input

possibly a converter sold to connect a new SVGA monitor to old arcade games


John

[109jb]

Are you actually asking what an MPG is for?

Are you actually asking this question 15 months after this thread died?

[Redzilla]

Are you actually asking this question 15 months after this thread died?

Do either of you even know what MPG stands for?lol manual pulse generator! I just googled it and google doesn't lie! LMAO

[Rusy1997]

I am also looking for the same. I just bought the bar display and want to do the same swap. If anyone can help me with this then please let me know. It will be a great help for me. Last time I did it with the help of the article but now not getting the same link. So Please let me know.