DM3000 LATHE DRIVER


Results 1 to 2 of 2

Thread: DM3000 LATHE DRIVER

  1. #1
    Member gabedrummin's Avatar
    Join Date
    Aug 2008
    Location
    united sates
    Posts
    403
    Downloads
    0
    Uploads
    0

    Default DM3000 LATHE DRIVER

    PIN 1& 2 is 48 volts,,, ,3 & 4 GND-2 ,,PIN 5 IS + 5 VOLTS,, PIN 6 IS STEP ,,PIN 7 IS DIRECTION,,,PIN 8 IS HERE ..Can someone please tell me what signal is pin 8 ? I would like to connect the drive to 48 volts and see if the motors work .I will connect the step and direction to my break out board and try driving it with Mach 3

    Similar Threads:
    Attached Thumbnails Attached Thumbnails DM3000 LATHE DRIVER-turret-drive-bmp  


  2. #2
    Member turbina's Avatar
    Join Date
    Apr 2006
    Location
    Italy
    Posts
    40
    Downloads
    0
    Uploads
    0

    Default Re: DM3000 LATHE DRIVER

    The pin here goes into the microcontroller on pin 12, has a 10k pullup resistor and currently has no function and should be kept unconnected



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

DM3000 LATHE DRIVER

DM3000 LATHE DRIVER