Need Help! Dyna 3000 Lathe


Results 1 to 4 of 4

Thread: Dyna 3000 Lathe

  1. #1
    Registered
    Join Date
    Jun 2009
    Location
    USA
    Posts
    7
    Downloads
    0
    Uploads
    0

    Default Dyna 3000 Lathe

    Lathe was shutdown for a few months and when it was turned back on the control wouldn't boot up. The LCD display just says "Display working!". You can press the buttons on the keypad and it will beep, but the lathe doesn't respond. Is there a battery inside the control?

    Similar Threads:


  2. #2
    Member
    Join Date
    Feb 2008
    Location
    USA
    Posts
    243
    Downloads
    0
    Uploads
    0

    Default

    Did you get it fixed?
    Dan



  3. #3
    Registered
    Join Date
    Feb 2014
    Posts
    1
    Downloads
    6
    Uploads
    0

    Default

    What did you do?
    please share your info
    thanks



  4. #4
    Registered
    Join Date
    Jun 2009
    Location
    USA
    Posts
    7
    Downloads
    0
    Uploads
    0

    Default

    Machine is still down. I posted for a friend who owns the machine and he has not tried to use it since.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Dyna 3000 Lathe

Dyna 3000 Lathe