Dyna Mechtronics

[vintageracer]

How about a 'Dyna Myte' sub board?

Not really sure where to put this category. The original 2200, 2300, 2400, 2800 mills and 3000 series lathes were bench top models but the 4000 and 4400 series at 4500lbs, are definitely not. None of these machines are currently in production, but have a loyal following.
Perhaps under the 'Benchtop Machines' section would be the best choice.

The 1007 is still made, not sure how many are sold, but it still falls within this category.

Dyna Mechtronics do make larger stand alone CNC mills, from the 2016 to the 4322. These don't fall within the bench top guidelines so would most likely be in its own section under 'MetalWorking Machines'. Once again not really sure how many were/are being sold.

And at the same time, what are the chances that posts relating to these machines be moved into this new section? I've seen numerous posts in numerous sections. Knee vertical mills, plasma machines and benchtop machines to name a few.

Thanks, Timothy

Similar Threads:

• Dyna Mechtronics 4400 (DM4400, dyna myte) reference + brochures & photos
• DYNA MECHTRONICS DYNA MYTE 3000 AND 2800 WANTED!!!
• Dyna mechtronics DM3000
• Dyna Mechtronics 4400
• DNC on the Dyna Mechtronics

[Caprirs]

The company's formal name is Dyna Mechtronics. They often put a name plate on the machines that stated "DYNAMYTE".

Dyna made the following machines:

Benchtop mills with SKIP control:
2000
2100
2200
2300
2400
2800
2900 (2800 with ATC)

Benchtop lathe with SKIP control:
3000

Full size with SKIP control:
4000
4400 (same as 4000 but with ATC)

Full size with Mitsubishi M3 & M520 controls:
DM4400M (same mechanicals as 4400 but with Mitsubishi M3 control)
DM4500
DM4800
DM4800C (re-badged Johnford mill with swing arm ATC)
DL3300 lathe

Benchtop with Dyna's PC control:
DM1007

Knee Mill with Dyna's PC control:
EM3116

Full size with Dyna's PC control:
DM2016
HF3016
DM3220
HF4020
DM4322

[vintageracer]

Cool. Even more history than I knew. Not that I know much.

Exactly the reason we need a Dyna Mechtronics section.

Timothy

PS. I have two DM4400's

[tom in nh]

Any chance in doing this?
I have 2 dyna myte 2000 mills.
Frustrating to search all over the place.
Tom

[cncadmin]

yes

[vintageracer]

Right on! Thanks.

Timothy

[pathfinder53105]

im just starting out programming a 3116 and need a sample program for drilling holes in a line , im missing something and it keeps going to z home after G01

[Joe T.]

im just starting out programming a 3116 and need a sample program for drilling holes in a line , im missing something and it keeps going to z home after G01

When I first got my 3116 I had a few issues that were loose wires. After I got that fixed it worked fine. Thought I would throw that out in case you just got your mill "installed".

Line cycle:
G35 L A N

L) is the length between holes
A) is the angle
N) is the number of holes

To use this you must first set a drill cycle with a G81 or G83.

G83 X0.000 Y0.000 Z-.250 R.100 Q.05 F2.0

X Y Z) are the coordinates of the hole
R) is the rapid plane for the start and end of the cycle
Q) is the step. In this case the drill will retract every .050" and resume until the Z depth is reached.
F) is the feed rate.

Hope this helps out. All these commands are on the right side of the screen when programing. Hit tab and the cursor will jump to the list and you can scroll through the commands and see the syntax.

[pathfinder53105]

i cannot find a drill option in the tool file on mazak m2 control

[cncfin]

Anyone have schematics for DM1007 ?
Replaced the spindle shaft encoder and it won't work anymore.

Any help greatly appreciated.

[aramsbudo]

I have a DYNA 2400 with the conversational programming. I love it. Has anyone here added the option of Mach 3 along side of the DYNA programming? I would appreciate any help.

[CyberTec]

hello everyone i think im in the right place but im looking to buy a Dyna Myte 1007 bench top vmc with the tool changer if anyone knows anyone willing to sell theirs i am interested in buying one and if theirs anything i really need to know about this machine before i do buy it?

[Esgh]

Alguém sabe o valor de um dynamyte1007, hoje? Tenho um aqui no Brasil, está sem o software de controle.