- Dyna Myte DM3300 Mitsubishi M500L Control Avaiable
-
Member
Dyna Myte DM3300 Mitsubishi M500L Control Avaiable
We are refitting a Dyna Myte DM3300 CNC Lathe. We are removing a working Mitsubishi M500 L control. We are selling the control cabinet including its contents (we may keep the turret control board if there is one) So you are getting a working CPU and its card cage, the two AC Servo Drives, the Spindle Drive Power supply, the two servo motors, the operator console panels as shown which include the monitor/keyboard and the controls to the right of the monitor. You are not getting the spindle motor or the spindle encoder.
The control powered up and we were able to jog the axis, run the spindle and index the turret. See videos of the machine working below.
You must buy the entire package. If you only want parts out of the package, then you tell me specifically which parts you want to be packed and shipped. The rest will be discarded.
Buyer will pay reasonable packing and actual shipping costs. The components MUST Be installed by a competent CNC Technician. You are encouraged to come see the control operational but it is being sold AS-IS. It currently has all its parameters for a Dyna Myte DM3300. Any questions, please ask. martyDOTescarcegaATgmailDOTcom or PM me directly
Control is located in Mesa, AZ
Walk Through, various functions:
Zeroing X & Z axis:
Collet Closer:
Control Panel:
Similar Threads:
-
- Dyna Myte DM3300 Mitsubishi M500L Control Avaiable
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules