Dyna2pc interface card

Results 1 to 2 of 2

Thread: Dyna2pc interface card

  1. #1
    Member J1E9F6F8's Avatar
    Join Date
    Aug 2021
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Dyna2pc interface card

    Hello all, I just acquired a Dyna 2400 with Mach 3 and a Dyna2pc interface card. The company the makes the interface has apparently fallen off the face of the earth. I have searched for info on the card in order to hook up the Z probe inputs but it has been an exercise in futility thus far. Anyone familiar with this interface card or can someone point me in the right direction to find out more about it?
    Thanks much, Jeff

    Similar Threads:


  2. #2
    Member
    Join Date
    Sep 2005
    Location
    USA
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default Re: Dyna2pc interface card

    I’ve never heard of Dyna2PC. I’ve been running a DM2400 for maybe 7 or 8 years now. I have some custom software to ease the pain of dynalang, and just send to the controller with rs232. My programs are simple by modern standards. I keep thinking that when the controller finally gives up the ghost, I’ll update to new electronics. I like the machine and it’s been surprisingly capable, just slow.


    Sent from my iPhone using Tapatalk



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Dyna2pc interface card

Dyna2pc interface card