Dyna Myte DM2800 Retrofited Control & Axis Drives

Results 1 to 2 of 2

Thread: Dyna Myte DM2800 Retrofited Control & Axis Drives

  1. #1
    Member 8sigma's Avatar
    Join Date
    Apr 2010
    Location
    USA
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default Dyna Myte DM2800 Retrofited Control & Axis Drives

    Dyna Myte DM2800 Retrofited Control & Axis Drives-p1030139-jpg
    Following some of the other build threads on here I managed to get my DM2800 running!
    I'm using:
    • Mach3 version 3.043.062
    • Warp9 Ethernet SmoothStepper
    • Gecko G540
    • IBM Pentium 4 PC

    Wiring Schematic with markups:
    DM2800_Schematic.pdf

    P852 Stepper Motor to G540 DB9 Pinouts:
    P852-G540-Pinouts.pdf

    What the control cabinet looked like when I started:
    Dyna Myte DM2800 Retrofited Control & Axis Drives-p1020790-jpg

    Overview of the control cabinet finished:
    Dyna Myte DM2800 Retrofited Control & Axis Drives-p1030119-jpg

    ESS mounted where the old Distribution Board mounted using existing holes:
    Dyna Myte DM2800 Retrofited Control & Axis Drives-p1030130-jpg

    Gecko G540 mounted to original drive brackets:
    Dyna Myte DM2800 Retrofited Control & Axis Drives-p1030122-jpg

    120 mm fan attached below G540 using original drive brackets and fender washers:
    Dyna Myte DM2800 Retrofited Control & Axis Drives-p1030123-jpg

    Link to a YouTube video of it running:


    I'm out of room for attachments so I'll make another post with more detail including the Mach3 configurations.
    Steve

    Similar Threads:


  2. #2
    Member 8sigma's Avatar
    Join Date
    Apr 2010
    Location
    USA
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default Mach3 Configurations:

    I just realized the replies display before the original post so please page down.

    General Configuration:
    Dyna Myte DM2800 Retrofited Control & Axis Drives-generalconfig-jpg

    Home / Limits
    Dyna Myte DM2800 Retrofited Control & Axis Drives-homelimits-jpg

    Input Signals 1/2:
    Dyna Myte DM2800 Retrofited Control & Axis Drives-inputsignals1-jpg

    Input Signals 2/2:
    Dyna Myte DM2800 Retrofited Control & Axis Drives-inputsignals2-jpg

    Motor Outputs:
    Dyna Myte DM2800 Retrofited Control & Axis Drives-motoroutputs-jpg

    Motor Tuning (X, Y, & Z are all the same):
    Dyna Myte DM2800 Retrofited Control & Axis Drives-motortuningx-jpg

    Output Signals:
    Dyna Myte DM2800 Retrofited Control & Axis Drives-outputsignals-jpg

    Spindle Setup:
    Dyna Myte DM2800 Retrofited Control & Axis Drives-spindlesetup-jpg



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Dyna Myte DM2800 Retrofited Control & Axis Drives

Dyna Myte DM2800 Retrofited Control & Axis Drives

Dyna Myte DM2800 Retrofited Control & Axis Drives