Dyna Myte 2800 rebuild

Results 1 to 7 of 7

Thread: Dyna Myte 2800 rebuild

  1. #1
    Member PeteRondeau's Avatar
    Join Date
    Sep 2019
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default Dyna Myte 2800 rebuild

    Ok, I've had a DM2800 for 6 years. During almost that entire time it has been disassembled for the purpose of rebuilding it. I've decided to give myself a push to get this project back on the fast track.
    To that end I'm going to upload the process to YouTube- Hopefully that will keep me focused and on track. If you'd like to follow along the first video can be found here:



    This is an overview that fast forwards the small amount of progress over the last 6 years into just a few minutes.
    Thanks!
    Pete

    Similar Threads:


  2. #2
    Member PeteRondeau's Avatar
    Join Date
    Sep 2019
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default Re: Dyna Myte 2800 rebuild Part 2

    Made some more progress towards getting this machine back up and running.
    This week I fabricated the missing Z axis counter weight.



    Pete



  3. #3
    Member PeteRondeau's Avatar
    Join Date
    Sep 2019
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default Dyna Myte DM2800 rebuild Part 3

    This week I began laying out the electrical panel for the DM2800 rebuild and retrofit. I have decided on the Centroid Acorn for this project. This will be my first time installing one of these. Years ago I built three Ah-Ha based machines and more recently, two Mach3 machines- so I'm hoping this will be a fun new experience. Going to try the Gecko Drive G251X modules for running the steppers.





  4. #4
    Member Fastest1's Avatar
    Join Date
    Nov 2009
    Location
    USA
    Posts
    4377
    Downloads
    0
    Uploads
    0

    Default Re: Dyna Myte 2800 rebuild

    Nice video and detail on your build.

    A lazy man does it twice.


  5. #5
    Member PeteRondeau's Avatar
    Join Date
    Sep 2019
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default Re: Dyna Myte 2800 rebuild

    Thank you! Hoping to get quite a bit further on the wiring this week.



  6. #6
    Member PeteRondeau's Avatar
    Join Date
    Sep 2019
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default Re: Dyna Myte 2800 rebuild

    Continuing on.
    This week I started wiring up the Centroid Acorn to the Gecko G251X stepper drives.
    Had a slight course correction in getting the step and direction signals to the drives but I think I'm on track now.





  7. #7
    Member PeteRondeau's Avatar
    Join Date
    Sep 2019
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default Re: Dyna Myte 2800 rebuild

    Trying to wrap up the electrical panel by getting power to the stepper drives. Still need to hook up the spindle drive but running into a lack of documentation there. if anybody has a manual for this Electro-Craft drive marked AW0016-6423 Rev B I would certainly appreciate it!





Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Dyna Myte 2800 rebuild

Dyna Myte 2800 rebuild

Dyna Myte 2800 rebuild