DM3000

Results 1 to 4 of 4

Thread: DM3000

  1. #1
    Member gabedrummin's Avatar
    Join Date
    Aug 2008
    Location
    united sates
    Posts
    295
    Downloads
    0
    Uploads
    0

    Default DM3000

    I would like to run the dyna stepper driver with Mach3 looking for the pin outs for the stepper driver input and out put .Hope someone has the specs or connection document .Thanks for your help.

    Similar Threads:


  2. #2
    Member machinehop5's Avatar
    Join Date
    Aug 2009
    Location
    United States
    Posts
    128
    Downloads
    0
    Uploads
    0

    Default Re: DM3000

    Reverse Engineer maybe. Any good Photos of your machine ?

    Found this Thread
    https://www.cnczone.com/forums/dyna-...onversion.html
    Good luck

    Last edited by machinehop5; 04-16-2019 at 01:06 AM.


  3. #3
    Member gabedrummin's Avatar
    Join Date
    Aug 2008
    Location
    united sates
    Posts
    295
    Downloads
    0
    Uploads
    0

    Default Re: DM3000

    What is connected to pin 7 ?



  4. #4
    Member gabedrummin's Avatar
    Join Date
    Aug 2008
    Location
    united sates
    Posts
    295
    Downloads
    0
    Uploads
    0

    Default Re: DM3000

    DM3000-drawing1-model-jpgThe distribution board out put to the stepper driver what is pin 7 ?Do I need anything besides Plus 48 and ground and the step and direction signals, and 5 volts to get motion ?



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

DM3000

DM3000