- EM3116 Tramming
-
Registered
EM3116 Tramming
Hey Guys,
Doing some face milling on my EM3116 and have found that the cutterhead is not square to the table. It's off enough that on a L-R cut the l cutters are taking over a thou after the R cutters have already passed by.
Hopefulyl that explanation makes sense.
The spindle is slightly out of square leaning left like this ----> \
I don't see any adjustments that I can make to rectify this.
Any ideas?
Similar Threads:
-
-
Member
I have exactly the same thing. Have contemplated many a time to loosen off the 4 mounting bolts a little and give it a.....nudge. I am quite certain it isn't meant to be that way. Odd tho that we both have the same issue
- EM3116 Tramming
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules