- Dyna DM4500 dead
-
Registered
Dyna DM4500 dead
I have a Dyna Myte DM4500 vmc. The machine has a following system configuration: Power Supply QX084, CPU QX611-1, Video Board QX522, Input/Output boards QX531. LED's on QX084, QX611-1, QX522 light in green, but the machine is like dead. There isn't NC Ready, the monitor doesn't light on. I checked the Power Supply voltage - +12V, -12V, 5V and 24V and they are o.k. There isn't HSYNC, VSYNC and VIDEO to the monitor. Could somebody help me!
best regards
Lyuben
Similar Threads:
-
- Dyna DM4500 dead
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules