Counter sink diameter at different depths.

Results 1 to 2 of 2

Thread: Counter sink diameter at different depths.

  1. #1
    Gniot's Avatar
    Join Date
    Apr 2019
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Counter sink diameter at different depths.

    Greetings,

    Does anyone know of a free program that would allow me to enter a c'sink diameter, and angle, and calculate the diameter at different depths?

    For example 90 degree .180" diameter on the surface.
    What would the diameter of the c'sink be at .015", .025" etc below the surface?

    Any ideas or a formula that might help calculate those numbers at different depths and angles?

    Regards,



  2. #2
    Member CadCamSam's Avatar
    Join Date
    Jan 2019
    Posts
    74
    Downloads
    0
    Uploads
    0

    Default

    USE TANGENT FORMULA:
    tan ang = opposite side(radius value) / adjacent side
    then multiply by 2
    then calc flat

    82deg csnk =41deg ang
    1" cnsnk dia = .5 opposite side

    tan 41=.8693
    x.5=.4346 dep

    .1dia tip =.05opposite side
    tan 41 *.05 =.0434

    .4346-.0434=.3911 final dep



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Counter sink diameter at different depths.

Counter sink diameter at different depths.

Counter sink diameter at different depths.